Kyoritsu Kew 6016, 10 Functional Test Device

Earth Resistance test (3 pole test and socket test), the possibility of performing Phase-Ground and Phase-Neutral tests in the socket

Testing the current drawn by the system by testing PSC (expected short circuit current) from the socket

Continuity

Isolation (1000 V)

Loop

PSC (Short circuit current)

PFC (Possible leakage current)

RCD (Residual current relay) test

Voltage

Frequency

Phase Sequence

Computer Connection with USB

The ability to store 1000 data

Technical Properties
Open Circuit Voltage (DC)	Short Circuit Current	Stage		Accuracy
5V ± 20%	Greater than 200mA	20/200/2000Ω Automatic Step		0~0.19Ω: ±0.1Ω 0.2~2000Ω: ±(2%rdg+8dgt)
2Ω Buzzer : Alert with Buzzer below 2 Ω when resistance is measured.
Technical Document
Insulation Resistance (High speed measurement)
Open Circuit Voltage (DC)	Current Value	Stage		Accuracy
250 V+25% -0%	1mA or bigger @ 250kΩ	20/200MΩ Automatic Step		0~19.9MΩ: ±(2%rdg+6dgt) 20~200MΩ:±(5%rdg+6dgt)
500V+25% -0% 1000 V+20% -0%	1mA or large @ 500kΩ 1mA or large @ 1MΩ	20/200/2000MΩ Automatic Step		0~199.9MΩ: ±(2%rdg+6dgt) 200~2000MΩ: ±(5%rdg+6dgt)
Loop Impedance
Function	Voltage Rating	Nominal Test Current External Loop at 0Ω: Magnitude / Time (at 230V)		Stage	Accuracy
L-PE	100~260V50/60Hz	20Ω: 6A/20ms 200Ω: 2A/20ms 2000Ω: 15mA/500ms		20/200/2000Ω Automatic Step	230V + 10% -15%: ± (3% rdg + 4dgt) without voltages: ± (3rdg + 8dgt)
L-PE (ATT)	100~260V 50/60Hz	L-N: 6A/60msN-PE: 10mA/approximatelly 5s		20/200/2000Ω Automatic Step L-N < 20Ω	230V + 10% -15%: ± (3% rdg + 6dgt) excluding voltages: ± (3rdg + 8dgt)
L-N / L-L	100~500V 50/60HzL-N:100~300V L-L:300~500V	20Ω:6A/20ms		20Ω	230V + 10% -15%: ± (3% rdg + 4dgt) without voltages: ± (3rdg + 8dgt)
PSC (L-N/L-L) / PFC (L-PE)
Function	Voltage Rating	Nominal Test current 0Ω External External Loop: Magnitude / Time (at 230V)		Step	Accuracy
PSC PFC PFC (ATT)	100~500V50/60Hz 100~260V50/60Hz 100~260V50/60Hz	6A / 20ms6A / 20ms2A / 20ms15mA / 500msL-N: 6A / 60msN-PE: 10mA / about 5s		2000A/20kA Automatic Step	PSC / PFC accuracy is obtained from the measured Loop Impedance specification and the measured voltage specification.
RCD
Function	Current Value	Step	Accuracy
			Current Throw		Discard Time
			AC Type	A Type
X1/2	10/30/100/300/500/1000mA	2000ms	-8%~-2%	-10%~0%	±(1rdg+3dgt)
X1	10/30/100/300/500/1000mA	G:550ms / S:1000ms	+2%~+8%	0%~+10%	±(1rdg+3dgt)
X5	10/30/100mA	410ms	+2%~+8%	0%~+10%	±(1rdg+3dgt)
Auto Ramp	10/30/100/300/500mA	20%~110% (per10%) G:300ms/S: 500msX10times	±4%	± 10%	±(1rdg+3dgt)
Automatic Test	The measurement accuracy depends on each function. In Measuring Order: X1 / 2 (0 °) → X1 / 2 (180 °) → X1 (0 °) → X1 (180 °) → X5 (0 °) → X5 (180 °) Measurements with x5 are not performed for RCDs with a nominal current of 100mA or more.
Uc	10/30/100/300/500/1000mA	0.0~100.0V	+5%~+15%rdg±8dgt
Voltage Value :230V+10%-15% 50/60Hz
Voltages
Function	Voltage Value	Measuring Range		Accuracy
Voltages	25~500V	25~500V		±(2%rdg+4dgt)
frequence	45~65Hz	45.0~65.0Hz		±(0.5%rdg+2dgt)
Earthing
		Measuring Range		Accuracy
3 wire earth resistance test		20/200/2000Ω		20Ω: ±(3%rdg+0.1Ω)
100Ω>Auxiliary Earth resistance		Automatic step		200/2000Ω: ±(3%rdg+3dgt)
Voltage Value	50~500V, 50/60Hz
Sing	Right Phase: "1-2-3" sign, Reverse Phase: "3-2-1" sign
Standarts	IEC61010-1: 2001, CAT III.300V Pollution Degree 2, IEC61557 1,2,3,4,5,6,7,: 2007, -10: 2001 IEC61010-031: 2002
Power Source	LR6x8
Dimensions	136(L)235(W)114(D) mm
Weight	1350g About
Accesories	Extended Test Probe, Distribution Board test probe fuse, Ground Test Probes (5m, 10m, 20m) and auxiliary ground rods, Test Probe Carrying bag, Carrying Case, User Manual, Batteries, USB Adapter with computer software “KEW Report”